Manual Operation Instruction of XON Box V6

Step 1:Place mining machine in the rack and ensure that the front of mining machine(fan) is aligned with beam of the front of rack.

Step 2: Place 9 sets of S21/T21 mining machines vertically inside each layer of the rack from floors 1 to 7.

Step 3: Connect 1pcs of ethernet cable to the mining machine.

Step 4: Connect the PDU and the mining machine with an AC cable.

Step 5: Turn on the Main Switch

Step 6: Turn on the Branch Switch of the Rack

Step 7: Turn on the mining machine one by one(Turn the switch of PDU for corresponding mining machines to ON).

Environmental Requirement of Mining Field

The ground should be hardened enough to support up to 3 floors(22t)

The flatness of the ground should be within ±1。

The broadband of the internet in the field should be above 100M

The ether cable should be SFTP and CAT5e or above

Out look of XON Box V6

XON Box V6-Specifications

Product Profile	Input Voltage,V	Min	Max
		380-415 AC
	Frequency,Hz	50/60
	Total Power Consumption,KW	1134	1600
	Safety Certificate	CE/CCC
Mining Machine	Power Consumption of Mining Machine (Estimation)	3600	4600
	Applicable Mining Machine	S21 Pro/T21
Container	Size of Container(LWH)	11900 x 2200x 2480(L x W x H) (mm)
	Hauled Weight of the Container,kg	Will be marked on the container
	Operating Weight of the Container ,kg	10000
	The Quantity of Mining Machine	324
	Current Capacity of the Main Switch	1600A
	Applicable Transformer	1 Set of Transformer with 3150KVA Supports 2 Containers
Environment	Operating Temperature	-25-40°C
	Operating Humidity	10%-90% RH

The Mine box internal structure diagram of XON Box v6

The Door+sealing plate of XON Box v6

Cable routing diagram of XON Box v6

S21/T21 position layout of XON Box v6

Decomposition Diagram of XON Box v6

The Main Parts of XON Box v6

Part of the cold and heat isolation scheme is displayed

The Main Parts of XON Box v6

Cold and hot isolation plates can be used in cold areas

The Main Parts of XON Box v6

Input Voltage,V： 380V~415V

Frequency,Hz： 50/60Hz

Rated power： 1100W

Rated air volume： 32500 m³/h

PDU -10+1(9 GB three-hole 200-240V

25A (S21/T21 miner) + 1 GB three holes 10A(Switch) Input Voltage

V： 346V~415V Frequency

Hz： 50/60Hz

Protective device： The 125A air switch has short-circuit protection

The outer frame structure of the cooling curtain module is made of galvanized sheet and inlaid with curtain paper.

Water entry and exit mode: up and down. Water consumption: 25 L/h

Power Distribution and Power Demand of XON Box v6

The Current Capacity of the Main Switch of the power distribution Cabinet:1600A

Rated Current:1600A

Input Voltage :380-415V ac 50/60HZ

Power Consumption of Mining Machine:3200-4600W(Estimation)

Inlet Cable: Single Core 600KcMil(300mm2)*4*5,Above 600V

3150KVA Transformer: Supports 2 sets of XON Box v6 to operate

simultaneously(Take operating status of S21/T21mining machine for example)

Power meter

Inlet indicator: ABC phase power supply specifications

Main switch(1600A)

The surge protector

Tributary switch:630A, corresponding to the shelf

Negative press motor protector

XON Box v6 -Recommendation For Layout in Mining Field

Layout Suggestions:

● Length assembly: recommended not more than 2 sets, 23.2 meters

● Layout: Single-layer air intakes are opposite each other. It is recommended that the transformers should be located at the side of the air intakes with a distance of more than 8 m

● The air outlet is opposite, the recommended distance is more than 6 meters, and the transformer is located on the side of the air inlet

● The spacing between each group is more than 2 meters

● Use environment: -25-40 degrees Celsius, humidity: 10-90%R

● Double-layer multi-group layout, please consult the transformer manufacturer for safe spacing of transformers.

● Arrangement: The air inlets are opposite each other. It is recommended that the distance between them is more than 9 meters. The transformer is located on the side of the air inlet.

● The air outlets are opposite each other. It is recommended that the distance be at least 5 meters. The transformer should be located on the side of the air inlet.

● Container spacing: The spacing between each group is more than 2 meters Usage environment: -25-45。C degrees Celsius, humidity: 10- 90%RH

Notes on Transportation, InstallATION, and UtiLization of XON Box v6

● A crane or a fork truck supporting 10T should be prepared by the client.

● XON Box should be placed on the ground with ±1°flatness.

● The ground should be hardened enough to support up to 20t if 2 layers are overlapped.

● Facilities including but not limited to the transformer, cable, cable tray, and cable distribution box are not on the list of the Mmc Box package.

● Operating Condition: Temperature -25°C~40°C; Humidity: 10%RH~90%RH.The cooling pad system should turned on when the ambient temperature is higher than 35 C. In areas with high temperatures and humidity, the operating temperature should not be over 40. The inlet and outlet shutters should be closed and the internal temperature should be warned up to above 0℃ before starting machines while operating in the area with ambient temperature below 0 ℃.

● Sea level: ≤2000 meters. Derating of transformer and switch should be taken into account with 1% of derating per each 100meters increased.

● Note: The operating temperature of XON Box could not be deemed as the same as mining machines.

● The opening direction of the container door should be confirmed. The door is on the left side in default facing against the air inlet.

Others

● A fire extinguisher with 4kg ABC dry powder and a rack needs to be prepared by the client.

● Smoke sensors support 24V needs to be prepared by the client. Connection cables are prepared well on the top of the container.

● There is only one camera focusing on the opening direction of the left door. The clients should remove this camera from the entrance door if a series of containers are placed together. Ethernet port and power outlet are reserved around the side of the entrance door.

● Cabling ladders are required for inlet wires, cabling racks are used to fix the cables.

● Only the top of the container is with thermal isolation layers, simple umbrellas are recommended to set up on top of containers.

Reviews

There are no reviews yet.

Be the first to review “XON Box V6 Air-cooling Container For Sale”

You must be logged in to post a review.

XON Box V6 Air-cooling Container For Sale

Manual Operation Instruction of XON Box V6