High Quality Used Innosilicon a10 ETHMaster 500Mh EtHash algorithm Minning Machine Low Shipping Cost

Please confirm our exclusive payment account before payment!

USD bank account : Starts with 798, ends with 378

TRC20 Start:TWKKd   End:Rps8eKqzr   ERC20 Start:0xDf305  End:D81e92d5

Innosilicon A10 7gb ETHMaster Innosilicon A10 Ethmaster was born in September 2019. It is a dedicated cryptocurrency mining machine for ETC/ETH mining. The whole machine is 136 x 285 x 362mm without packaging. The bare weight of the machine is 8.1 kg.




Innosilicon A10 7Gb 500Mh


September 2019

Hashrate, TH/s




Noise level



136 x 285 x 362mm




The price of the product changes from time to time. The price may be low or high.  Please consult us for the specific price, the best price in the market…                          Please contact us to calculate the freight before payment.                

asic miner value

Innosilicon A10 7gb ETHMaster Innosilicon A10 Ethmaster was born in September 2019. It is a dedicated cryptocurrency mining machine for ETC/ETH mining. The whole machine is 136 x 285 x 362mm without packaging. The bare weight of the machine is 8.1 kg. The machine is equipped with a traditional fan cooling design, with two cooling fans, and the heat dissipation performance is very good. The operating temperature of the machine is 5-45 degrees Celsius, and it needs to operate at 5-95% ambient humidity. A suitable operating environment can effectively improve the efficiency and service cycle of the machine.

Specifications of  Innosilicon A10 7gb

Manufacturer Innosilicon
Model A10 ETHMaster (500Mh)
Also known as A10 ETHKing
Release September 2019
Size 136 x 285 x 362mm
Weight 8100g
Noise level 75db
Fan(s) 2
Power 750W
Voltage 12V
Interface Ethernet
Temperature 5 – 45 °C
Humidity 5 – 95 %

Introduction of Innosilicon A10 Miner:

Innosilicon A10 Miner is a high-performance ASIC miner designed for mining cryptocurrencies such as ETC and ETH. Developed by Innosilicon, a leading manufacturer of ASIC miners, the A10 Miner is one of the most powerful mining rigs on the market today, boasting an impressive hash rate of up to 500 MH/s with a power consumption of 750 watts. This guide will provide a detailed introduction to the Innosilicon A10 Miner, including its features, specifications, and performance.

The Innosilicon A10 7gb Miner is a highly efficient and powerful mining machine that offers exceptional performance, low power consumption, and high profitability. It is based on the EtHash algorithm and can mine Bitcoin at a hashrate of up to 500 MH/s, Litecoin at up to 5.2 GH/s, and Ethereum at up to 500 MH/s. The A10 is equipped with the latest ASIC chips and has a power consumption of only 750 watts, making it one of the most energy-efficient mining machines on the market.

ASIC Technology:

The A10 Miner is built using advanced Application-Specific Integrated Circuit (ASIC) technology, which is designed to perform a single task, such as mining cryptocurrency, with high efficiency and speed. ASICs are specifically designed to process the mathematical calculations required for mining, making them much more efficient than general-purpose CPUs or GPUs. This results in significantly lower power consumption and higher hash rates.

Hash Rate:

The A10 Miner has a hash rate of up to 500 MH/s, making it one of the most powerful ASIC miners on the market. The hash rate is the speed at which the miner can process the mathematical calculations required for mining, and a higher hash rate means more mining power. With its high hash rate, the A10 Miner is capable of mining a wide range of cryptocurrencies, including Ethereum, Ethereum Classic, and other coins that use the Ethash algorithm.

Power Consumption:

One of the key advantages of the A10 Miner is its low power consumption. The miner consumes only 750W of power, making it much more energy-efficient than other miners with similar hash rates. This translates into lower electricity costs and higher profitability for miners.

Cooling System:

The A10 Miner is equipped with an advanced cooling system to keep the miner running smoothly and prevent overheating. The miner uses a combination of air and liquid cooling to maintain a stable temperature and prevent damage to the hardware. The cooling system is also designed to operate quietly, making it ideal for home mining setups.

Mining Software:

The A10 Miner is compatible with a range of mining software, including Ethminer, Claymore, and PhoenixMiner. These software packages provide an easy-to-use interface for configuring the miner and monitoring its performance. They also include features such as automatic restarts in case of a hardware failure, which helps to minimize downtime and maximize mining profitability.

Network Connectivity:

The A10 Miner has built-in Ethernet connectivity, allowing it to connect to a local network and be controlled remotely. This is particularly useful for large-scale mining operations where multiple miners need to be managed from a central location. The miner also supports multiple mining pools, giving miners the flexibility to switch between pools to maximize profitability.

Power Supply:

The A10 Miner requires a 220V power supply with a minimum capacity of 10A. The power supply is not included with the miner and must be purchased separately. It is important to choose a high-quality power supply to ensure the stable and reliable operation of the miner.

Dimensions and Weight:

The A10 Miner has a compact design and measures 362mm x 136mm x 285mm. It weighs approximately 8.55kg, making it easy to move and install.


The Innosilicon A10 Miner is a high-performance ASIC miner that is ideal for mining Ethereum and other Ethash-based cryptocurrencies. With its high hash rate, low power consumption, and advanced cooling system, the A10 Miner offers a compelling combination of performance and efficiency. Its compatibility with a range of mining software and network connectivity options also make it a flexible and versatile choice for miners. Overall, the A10 Miner is an excellent choice for miners looking for a powerful and reliable ASIC miner.


First of all, thank you for your interest in and support of X-ON MINING. In order to avoid misunderstandings in the process of purchasing a miner,

please read all the following notes carefully before placing your order. Thank you very much for your understanding!

1 -Payment

Given the specific dynamics of the miner market, when we receive your payment, the miner’s price may have changed and we may need to refund your order.  

We use batch processing for all mining machine orders, and the quantity of each batch is very limited.  Even if the same type of mining machine is, different batches of mining machine prices are not the same.  They’re selling fast.  Given the highly variable market and demand, the prices of stock miners may vary from day to day.  Therefore,

there is a possibility that by the time we receive your payment, the price of the mining machine has gone up and we need to refund your order.

2 – About stock miners

The delivery date of stock Miner is 3-7 working days.  Once we receive your order, we will immediately notify our technical center staff to test the machine you ordered to make sure it works well.  We’ll also send you a video for confirmation.  We will send the machine to you only after we confirm that all the properties of the machine are correct.  Then, we will give the machine to our freight forwarder.  We will update the waybill number on our website and you will receive a detailed email.

3 – About pre-purchase miners

The actual delivery date of the pre-ordered miner depends on the miner delivery date of the factory.  We will indicate on the order page the estimated delivery month of the pre-ordered miner for your consideration.  However, there may still be a delay in delivery.  First, if delay the factory delivery date, then will also delay the delivery of the X-ON MINING Mining machine. It is also possible that the plant will not be able to produce the mining machine within the expected time, in which case we will process your order for a refund.


(1) Inlet water temperature

(2) Caution: Wrong input voltage may probably cause the miner damaged

innosilicon a10 innosilicon a10 7gb




Innosilicon A10 7Gb 500Mh


September 2019

Hashrate, TH/s




Noise level



136 x 285 x 362mm



Shipping & Payment

①Order processing

  • when the customer places an order with us, the stock model will be shipped from Shenzhen warehouse within 1-5 days.
  • X-on mining machine manufacturers test all mining machines before shipment to ensure their high quality and make sure that the mining machines are shipped without any problems.
  • For payment, we support bank cards, bank card transfers, tether payments, etc. to make payment easier for customers.
  • All mining machines are shipped by DHL, FEDEX, UPS, EMS, etc. If you have any needs, we will do our best to meet all your needs.
  • After the goods leave our warehouse, we will provide you with tracking information within 24 hours to ensure that both parties can track the exact location of the goods.
  • Goods usually take 4-9 days to reach any destination in the world.
  • We will provide you with all the latest information about the order by email or phone, including but not limited to the location of the goods, the condition of the goods, etc.


Please note that the platform only allows payments via Coinbase. If your preferred payment method is offline payment or wire transfer, please contact with the X-ON Mining team via email or online chat so that we can assist you with the order.

Way 1Offline Payment

0 xf9732f3405a0c99d5c418696013979c42f893d00
0 x26542c2f66dfba4d969b5cf7b3e49c9c210ea484
0 x26542c2f66dfba4d969b5cf7b3e49c9c210ea484

Way 2: Bank transfer

Beneficiary Name:)


Beneficiary Account Number:


Bank Routing Number: (ABA #)


Bank Swift Code:


Receiving Bank Name:

East West Bank

Receiving Bank Address:

9300 Flair Drive, 4th Fl.


El Monte, CA 91731

③Packaging and Shipping

  • All mining machines have proper power supply and strict original packaging to ensure the normal operation of the goods.
  • Before delivery, we mark the package “fragile” to ensure that the goods will not be damaged during transportation.
  • Under normal circumstances, the arrival time of the goods is 4-9 days, depending on the distance of the destination. Our service team will track the logistics information of the goods in real-time to ensure the safe delivery of the mining machine to the customer as soon as possible.


Warranty Limitations

We offer no warranty for pre-installed software, its quality, performance, functionality, or compatibility for a particular purpose. We do not warrant that the functions contained in the software will meet specific requirements or that the operation of the software will be uninterrupted or error-free. The product is sold “as is”.

  • All brand-new mining machines have a 180-day warranty, and you can check the details on the official website of the mining machine.
  • The technical team of x-on mining machine manufacturers will provide you with answers to technical, logistics and other information throughout the day to help you solve any problems.

To the extent permitted by applicable law, this warranty does not apply to:

  • normal wear and tear;
  • damage resulting from accident, abuse, misuse, neglect, improper handling, or improper installation;
  • damage or loss of the product caused by undue physical or electrical stress, including but not limited to moisture, corrosive environments, high voltage surges, extreme temperatures, shipping, or abnormal working conditions;
  • damage or loss of the product caused by acts of nature including, but not limited to, floods, storms, fires, and earthquakes;
  • damage caused by operator error, or non-compliance with instructions as set out in accompanying documentation;
  • alterations by persons other than us, associated partners, or authorized service facilities;
  • products, on which the original software has been replaced or modified by persons other than us, associated partners, or authorized service facilities;
  • counterfeit products;
  • damage or loss of data due to interoperability with current and/or future versions of the operating system, software, and/or hardware;
  • damage or loss of data caused by improper usage and behavior which is not recommended and/or permitted in the product documentation;
  • failure of the product caused by the usage of the products not supplied by us;
  • hash boards or chips are burnt.


All items are non-refundable and the order is not cancelable. (Except in the increase in mining machine prices due to the fluctuation of prices  or in the case of out-of-stock)

Warranty Service

During the warranty period, we will undertake to repair, or based on our sole discretion, to replace a defective product by an identical or similar (e.g. newer) version of the product, unless the defect was the result of Warranty limitations.

The costs incurred in connection with the return of the product, part, or component to our service processing facility shall be carried by the product owner. If the product, part, or component is returned uninsured, you assume all risks of loss or damage during shipment.

Warranty Period for all Miners

  • The warranty period for brand-new machines is 6 months
  • No warranty period for used machines
  • Antminer S19 series machine warranty period is 1 year


1 — Transportation costs and all other costs (if any) pertaining to the return of a product shall be under the sole responsibility of the purchaser.

2 — The period of repair shall depend on the type of problems encountered. 


There are no reviews yet.

Be the first to review “High Quality Used Innosilicon a10 ETHMaster 500Mh EtHash algorithm Minning Machine Low Shipping Cost”

Your email address will not be published. Required fields are marked *

Language »

Get The Discount and Latest Price Now

Join us we will send you the latest quotes every day