Antminer S19 pro 110Th introduction

X-on mining provides plenty of Antminer S19 pro 110Th, Antminer S19 pro for sale.

The Antminer S19 pro 110Th is designed with an integrated chassis and power supply. The size of the bare metal is 370*195.5*290mm. It can be placed horizontally or vertically according to the space of the mine shelf, and the mass is 13.2kg.

The heat dissipation of the S19 pro miner machine is designed with front and rear double-tube fans. The outer surface of the fan is protected by a mesh cover so that the maintenance personnel of the mine can avoid injury by mistakenly touching the blades. There is a mesh on the back of the fan for effective

It prevents external dust particles from entering the high-speed rotating fan and touching the hash board.

Thermal design of Antminer s19 pro

The voltage of a single fan is 12V, the current is 1.65A, the maximum speed is 6150rpm, and the maximum fan is 197cfm. According to the characteristics of the fan, the parallel fan design on one side of the miner significantly increases the ventilation.

The series design of fans on both sides of the mining machine significantly enhances the resistance of the mining machine to environmental resistance, so that the ventilation volume of the mining machine will not fluctuate violently with the change in the mining environment.

The hash board inside the S19 pro 110T mining machine uses a whole heat sink to dissipate heat. The heat sink is designed to be streamlined. Although the wind resistance cannot be effectively reduced, the design of the heat sink effectively increases the heat dissipation of the chip.

area, so that the heat generated by the chip is evenly and quickly transferred to the heat sink.

Antminer s19 pro for sale (110T)， It has 11oth /s hash capability at 3250W power consumption.

Product Specifications

Manufacturer	Bitmain
Model	S19 Pro
Release	May 2020
Hashrate, Th/s	110
Power on wall @25°C, Watt	3250
Power efficiency on wall @25°C, J/T	29.5
Noise Level	75db
Fan (s)	4
Algorithm | Cryptocurrency	SHA256 | BTC/BCH/BSV

Detailed Characteristics

Power Supply

Power supply AC Input voltage range V	200~240V AC
Power supply AC Input Frequency Range, Hz	47~63
Power supply AC Input current, Amp	20

Hardware Configuration

Networking connection mode	RJ45 Ethernet 10/100M
Miner Size (Length*Width*Height, w/o package),mm	370x 195.5 x 290mm
Miner Size (Length*Width*Height, with package),mm	570x 316 x 430mm
Net weight, kg	13.2
Gross weight, kg	15.2

Environment Requirements

Operation temperature,°C	0~40
Storage temperature,°C	-20~70
Operation humidity(non-condensing) , RH	10~90%
Operation altitude, m	≤2000

 

The Antminer S19 Pro is a powerful cryptocurrency mining machine designed and manufactured by Bitmain, a leading producer of mining equipment in the blockchain industry. It is one of the most advanced and efficient miners currently available, offering high hash rates and low energy consumption. In this article, we will discuss the Antminer S19 Pro in detail, including its specifications, features, and benefits.

Specifications:

The Antminer S19 Pro is equipped with the latest generation of Bitmain’s custom-made chips, the BM1397. These chips are designed specifically for mining cryptocurrencies using the SHA-256 algorithm, which is used by Bitcoin and other cryptocurrencies. The Antminer S19 Pro has a hash rate of up to 110 TH/s, which means it can solve complex mathematical problems that are required to verify transactions on the blockchain network at an extremely fast speed.

The machine consumes a maximum power of 3250 watts, which makes it one of the most energy-efficient miners in the market. It requires a power supply unit (PSU) of 3250 watts, which is sold separately. The Antminer S19 Pro has a weight of 15.5 kg and dimensions of 400mm (L) x 195mm (W) x 290mm (H).

Features:

The Antminer S19 Pro has several features that make it a popular choice among cryptocurrency miners. One of its most notable features is its high hash rate, which allows it to mine Bitcoin and other cryptocurrencies at a faster speed than other miners. This means that miners using the Antminer S19 Pro can mine more cryptocurrencies in less time, resulting in higher profits.

The machine is also equipped with a high-quality cooling system that keeps the temperature of the miner under control. This is important because mining generates a lot of heat, which can damage the equipment if not properly managed. The Antminer S19 Pro has two cooling fans and a heat sink that work together to keep the temperature of the miner within safe limits.

Another important feature of the Antminer S19 Pro is its user-friendly interface. The miner can be controlled using a web-based management interface that is accessible from any device with an internet connection. The interface allows users to monitor the miner’s performance, change settings, and receive alerts when there are issues that need attention.

Benefits:

The Antminer S19 Pro offers several benefits to cryptocurrency miners. The high hash rate of the miner means that it can solve complex mathematical problems quickly, which translates to more cryptocurrencies mined in less time. This, in turn, results in higher profits for the miners.

The energy efficiency of the Antminer S19 Pro is another benefit. The machine consumes less energy than other miners with similar hash rates, which means lower electricity bills for the miners. This is especially important because electricity costs can significantly impact the profitability of cryptocurrency mining.

The cooling system of the Antminer S19 Pro is also a significant benefit. The machine’s ability to maintain a safe temperature means that it can operate continuously without downtime due to overheating. This is important because downtime can result in lost mining opportunities and decreased profits.

Conclusion:

The Antminer S19 Pro is a powerful and efficient cryptocurrency mining machine that offers high hash rates and low energy consumption. Its user-friendly interface and high-quality cooling system make it a popular choice among cryptocurrency miners. The Antminer S19 Pro’s high hash rate and energy efficiency result in higher profits and lower electricity bills for the miners. Overall, the Antminer S19 Pro is an excellent choice for those looking to mine cryptocurrencies.

Antminer S19 pro 110Th operating data measured

The air inlet temperature of Antminer S19 Pro 110TH is 23.1 ° C, the relative humidity is 70 %, and the air export temperature is 38.8 ° C. The humidity of the air socket is 32 %, the average air volume is 370cfm, the temperature of the power socket is 28 ° C, the overall power consumption of the S19 Pro 110T mining machine is 3320W, and the average computer power is displayed on the table. The mining machine control page is about 111.6/s. As a result, the power ratio of the S19 Pro 110T mining machine was 29.7W/T.

The computing power of the S19 Pro in the mining pool is also great. Viabtc’s background research shows that compared with the traditional PPS+ model, the effective computing power is 111th/s average, and the highest efficiency can reach 23.99 %.

Note that the miner is affected by high temperature

According to relevant statistics, 45 % of the damage to electronic products is caused by high temperatures and excessive heat dissipation. The high-temperature problem in the mine is mainly due to insufficient ventilation, which causes the air socket temperature of the mining machine to be too high. When the miners are running, it is necessary to observe the airflow through the miners to observe the changes in the computing power of the miners.

Miners in different areas of ore have a large difference in the volume of the air environment and the air volume of the mining machine, which directly affects the temperature of the air socket of the mining machine. In order to ensure that the export temperature of the mining machine is maintained within an appropriate range, the mining site needs to calculate the airflow of the mining machine at each position during the design and reduce the entry temperature of the summer mining machine.

For this experimental test, the ventilation layout is reasonable, and the temperature of the entrance air is relatively low. After calculation, the popular air of the summer mining machine does not exceed 47 ° C. The operating environment of the mining machine is very good, and the relative humidity and dust particle concentration remain at a proper and good level.

Antminer S19 Pro 110 Summary

The entire S19 Pro 110T Miner uses an integrated design, and the structure is more compact and reasonable.

The scattered design of the mining machine is reasonable, and the combination of fan and radiator ensures the good heat dissipation capacity of the mining machine.

In the running state, the average calculation power of the mining machine is about 111.8th/s, the power consumption is 3320W, and the actual air volume is 370CFM.

In summer, the maximum temperature that can bear the air socket of the miners is 61 ° C. The relative humidity can withstand more than 30-90 %, which greatly improves the adaptability of the miners to the mine.

If you are interested in the S19 Pro 110T mining machine, please contact us, we will reply to you as soon as possible.

 

Additional Information

丨Buying guide

1. Website prices do not include shipping, customs fees, and taxes, for some countries, we can provide low-price declaration as well as DDP service.
2. Product display is for reference only, the actual shipping version may change due to manufacturer updates.
3. X-ON MINING protects customer information, ensures the safety of customer transactions, and has cooperated with asicminervalue, asicminercompare, asicprices and other brands, with a high degree of reliability.

丨Shipping details

1. We will arrange the delivery of full payment orders according to the principle of payment order.
2. For pre-order orders, subject to the factory delivery date, X-ON MINING will inform the customer in time and follow up on the order at any time.
3. Need to buy additional power supply, chassis, water cooling air cooling system, please contact our salesman for detailed communication.
4. We provide verified video before delivery to ensure the normal operation of the machine.

丨Warranty

1. For different mining machines, Bitmain offers different warranty periods, which can be viewed in the repair guide.
2. In warranty time, the customer bears the postage to send back, Bitmain bears the postage to send back to the customer;
For machines outside the warranty, the customer needs to pay for maintenance and postage, machines paid on arrival will be rejected.
3. Do not assemble the faulty computing plate of multiple mining machines into one mining machine for maintenance.
4. Under normal circumstances, the maintenance cycle is about one week to complete the repair and return.
5. See the full list of terms at https://service.bitmain.com/support/terms.