Profitable Used Antminer S17+ 73th Crypto Asic Miner, Bitmain Antminer S17+ Blockchain Mining Machine In Stock

Antminer S17+ 73th, Bitmain Antminer S17+ For Sale, born in December 2019, SHA-256 algorithm, maximum hashrate 73th/s, power consumption is 2920W. The naked size of the S17+ mining machine is 175*298*304mm, and the weight of the machine is 11 kg. In terms of the S17 series models, the weight of the S17+ is still relatively heavy. The machine uses the fan heat dissipation method of the S17 series, equipped with 4 typhoon fans for heat dissipation, so its heat dissipation performance is also very good.  The suitable operating temperature of the machine is 5-45°C. After testing, the noise decibel of the machine is 75db. Compared with the models of the S17 series, the noise of the S17+ is relatively small, so the miners can rest assured to use it.

Specifications of Antminer S17+ 73Th/s

The Antminer S17+ is a high-performance ASIC miner developed by Bitmain, a leading manufacturer of mining hardware. The S17+ is designed to offer efficient mining performance, making it a popular choice for cryptocurrency miners around the world.
In this introduction, we will explore the features, specifications, and overall performance of the Antminer S17+.

Power Consumption

The Antminer S17+ is an energy-efficient miner that consumes 36W/T of power, making it one of the most power-efficient miners on the market.

The miner requires a 220V power supply and comes with a built-in power supply unit (PSU) capable of delivering up to 2920W of power.

Mining Efficiency

The Antminer S17+ has a mining efficiency of 39.5 J/TH, which is relatively low compared to some other miners on the market. However, the S17+ is still a highly efficient miner, and its low power consumption helps to offset the lower mining efficiency.

Performance

The Antminer S17+ is a highly efficient and powerful miner, capable of delivering exceptional mining performance. The miner’s high hashrate and low power consumption make it a popular choice among miners looking to maximize their profits while minimizing their energy costs.

The S17+ uses advanced 7nm ASIC chips, which are highly efficient and powerful, allowing the miner to achieve a hashrate of 73 TH/s. This high hashrate makes the S17+ one of the most powerful miners on the market, and it is well-suited for mining cryptocurrencies that use the SHA-256 algorithm.

In addition to its high hashrate, the Antminer S17+ is also highly efficient, consuming just 36W/T of power. This low power consumption helps to reduce energy costs, making the miner more profitable for miners.

Bitmain Antminer S17+ Appearance

The standard value of logistics warehousing, the specification, and model of the mining machine, and the barcode identification code, including the weight of the box is about 11KG.

The only difference between each model is that a label add under the barcode of the mining machine,

which has been certified by the technical regulations of the Customs Union to ensure product safety unified standards and certification of requirements.

The interior is encapsulated by a customized Tiandi cover pearl foam mining machine, and there are gaps around the periphery to facilitate the pick and place of the mining machine. The inside of the box is also equipped with a mining machine qualification certificate and multi-national language instructions, which is convenient for miners in various countries to understand the detailed operation.

There is also an anti-static shield inside the miner for enhanced protection. The net weight of the Bitmain Antminer S17+ 76T is 9.8KG and the size is 298*178*304mm. At a rough glance, the Bitmain Antminer S17+ is not much different from other S17 series mining machines.

The mining machine uses an all-in-one machine design with front and rear dual exhaust air and parallels dual fans.

Bitmain Antminer S17+ 76T Detailed Review

Antminer S17+ 76T adopts ultra-high integration, the whole machine is an integrated design, the changes of the mining machine need to analyze from the details, we can analyze the overall details of the mining machine by dismantling.

Dashboard Details

The control panel cover combines the design of Antminer S9SE and Antminer B7, combining buttons and screws, abandoning the sliding cover design of B7, and changing to a flip cover design, which is much more convenient, remove the screws, Press and hold the button up to open the lid.

Location details of the power connection tabs

Bitmain Antminer S17+ 76T adopts a fully wrapped body design, so the cable of the machine is not exposed. Due to the change of the chassis, the cover of the control board and the cover of the power supply are separated, so that an additional shell-install at the position of the power connection piece, and the shell is fixed with snaps and screws.

Power Details

The Bitmain Antminer S17+ 76T is equipped with an APW9+ power supply, providing 12.3V, 14.5-21V DC voltage, rated power of 3600W, and a maximum rated current of 170A.

The APW9+ power supply PFC and PWM output of Antminer S17+ 76T can extend the life of components and enhance reliability, and use three fans to supply air to provide active cooling for the power supply. The APW9+ power supply has a compact structure and dual inputs can reduce the power consumption and safety risks of heating the input cable socket.

fan details

The fan is the heat dissipation guarantee of the Antminer S17+de. The whole machine uses four fans in double parallel to provide heat dissipation, and the case fixes in the form of snaps and screws.

Bitmain officially said that the Antminer S17+ 76T adopts a deeply customized and optimized cooling solution,

which reduces losses through refined temperature control,

making the operation of the miner more efficient and stable. This reflects in the fan, the air inlet, and the outlet of the miner. The current of the fan is different.

The current of the air inlet is 2.7A, while the current of the fan at the air outlet is 3.14A, which is not much different but reflects the refinement of the design.

install the baffle uses a relatively complex casting process, and uses a sponge as a buffer material on the contact surface with the hash board to reduce the impact of the mining machine on the hash board and the casing during transportation.

Dashboard details

After disassembling the fan, you can see the computing power board. The Antminer S17+ 76T has three built-in computing power boards,

and the three computing power boards are all installed in the chassis through the fitted card slots. Each hash board carries 65 7nm chips, and the three hash boards have a total of 195 chips.

Both sides of the hash board cover with the stainless steel heat sink of different lengths. The heat sink on the air inlet side is shorter and more dispersed,

and the length and density of the air outlet side are greater. Maybe this is the depth of the Antminer S17+ 76T. Customized and optimized heat dissipation design, of course, more details reflected in software control.

Antminer S17+ 76T shell details evaluation

The chassis of the Antminer S17+ 76T is no longer a one-piece die-casting structure but it divides into two parts. The two sides form separately and then connect through the card slot to form the intention. This structure makes the miner lie flat. As a result, the miner will tilt a little,

This explains why there are four pads included in the package. The chassis is made of aluminum alloy, and it is uncommon for the inner wall to show a rainbow-like color.